Motorrad Meister
V-TECH Module
The Motorrad Meister Meister Module is a premium Plug & Play control module developed specifically for BMW motorcycles.
Designed to work seamlessly with your motorcycle's original electronics,
the Meister Module allows you to control the exhaust valve using the
OEM handlebar buttons—without installing any additional switches or modifying the factory wiring.

Maintain the clean OEM appearance while enjoying enhanced control and convenience.

OEM Button Control

Control the exhaust valve using the motorcycle's original handlebar buttons.

No additional switches. No external controllers.

She has been nominated for an Academy Award, two Grammy Awards, and the Mercury Prize

Plug & Play Installation


The Meister Module connects directly to the factory wiring using OEM-style connectors.


  • No wire cutting
  • No permanent modifications
  • Fully reversible installation

OEM-Level CAN Bus Integration

The Meister Module communicates seamlessly with your motorcycle's OEM CAN bus system using a dedicated

Listen-Only interface.


By passively monitoring vehicle data without transmitting or modifying any signals, it ensures error-free, non-intrusive operation while preserving full OEM system integrity.



✔ No warning lights

✔ No fault codes

✔ No diagnostic errors

✔ Seamless CAN bus communication

Factory Appearance

The module remains completely hidden after installation, maintaining the motorcycle's original OEM appearance.

How It Works

The Meister Module seamlessly integrates with your motorcycle's OEM electronic system, allowing the rider to control the exhaust valve using the factory handlebar buttons.


With a simple button operation, the module instantly switches the exhaust valve between its available modes while maintaining full OEM functionality.

No extra switches. No additional wiring. Just seamless OEM integration.


Complete Installation Kit

Everything you need for a quick and easy installation.


  • Meister Module
  • Cable Ties
  • Adhesion Promoter (Primer)
  • Motorrad Meister Decal

Simple installation. Everything you need is included in the box.


Compatible Models

The Meister Module is compatible with the following BMW motorcycles:

  • BMW R nineT (Euro 4 and newer)
  • BMW S1000R / S1000RR / S1000XR (Euro 4 and newer)
  • BMW M1000R / M1000RR / M1000XR (All model years)
  • BMW R1200R / R1200GS / R1200RS (LC) (2013 and newer)
  • BMW R1250R / R1250GS / R1250RS (All model years)
  • BMW F900XR

Compatibility may vary depending on the motorcycle's model year and equipment. If you have any questions, please contact us before placing your order.

Select your motorcycle model to view the installation guide.
BMW R nineT (Euro 4 and newer)
BMW S1000R / S1000RR / S1000XR (Euro 4 and newer)
BMW M1000R / M1000RR / M1000XR (All models)
Our Clients Love Us
  • I’m using it well, and I’m satisfied with it.
    ck****
    RnineT EURO5
  • I installed it very easily by following the manual. It works perfectly!
    zr****
    S1000RR EURO 5
  • The best part about using it is that I live in a residential area, so when I close the exhaust and ride in, it becomes very quiet. Now my neighbors don’t complain about noise anymore! Also, I really like that it works with the OEM button, so I didn’t need to install any extra switches.
    wjst*****
    S1000RR EURO5
  • I previously had another brand installed with a separate switch, but the position was awkward and inconvenient to use while riding. So I switched to this for the new season.
    At first, it even feels a bit louder than my previous setup, but I need more riding time to be sure after the long winter break.
    The sound difference between stock and open mode is very clear.
    It’s very convenient to switch modes while keeping both hands on the grips.
    Installation was easy overall, and I was able to complete it with phone guidance when I got a bit stuck. Very satisfied so far!
    yeeh****
    RnineT EURO5
  • I really dislike messy wiring and installing extra switches, but this system works with the OEM button, so everything stays very clean and super convenient.
    The installation steps were explained in great detail over the phone, so depending on the bike model the difficulty may vary. In my case, it was a bit difficult because I couldn’t get my hands into the tight space, but I managed to get it done.
    The clear difference in sound between ON and OFF modes completely removed my thoughts about changing the muffler. I’m very satisfied with it. Thank you very much!
    kbs***
    S1000RR EURO5
  • It works very well, which is great. I’m satisfied that there’s no need to install a separate button.
    jeel********
  • Fast delivery, easy to use, and no error codes at all—there’s really nothing to complain about, it works great~~ Even my rider friends around me say they want to get it too lol
    wntl***********
  • Installed on my 2023 S1000RR.
    Even with a stock Akrapovič exhaust, the sound difference is noticeable—very satisfying, almost no need to change the muffler. Still considering it, as an aftermarket exhaust might make the modes even more distinct.
    No separate switch needed, no warning lights, and everything works perfectly.
    Very happy with it.
    jong*******
    S1000RR 2023MY
Contacts
If you have any questions about compatibility, installation, or the operation of the Meister Module, our team is always here to help.

We also welcome inquiries about dealership opportunities, distribution, and business partnerships.
Get in touch with us—we'll be happy to answer your questions.



1F MOTORRAD MEISTER, 26, Mabang-ro 6-gil, Seocho-gu, Seoul, Republic of Korea

Phone: +82 10 9790 5753
Email: motorradmeister@naver.com

Connect us via WhatsApp
Connect us via Telegram
MOTORRAD MEISTER is a premium brand of motorcycle electronic control modules and performance accessories, delivering precise, reliable,
OEM-integrated solutions that enhance riding control while maintaining factory usability.
Made on
Tilda